Posts Tagged “vehicles”
-
Custom Intake Manifold for a Husqvarna 2003-2007 SM/TC/TE 250/450/510cc
Engineering a new custom intake manifold that was discontinued by Husqvarna for a wide range of models.
-
Fiberglass Hull Repair for Kawasaki 750sx Standup Jetski
The process of repairing a damaged fiberglass hull on a Kawasaki 750sx standup jetski.
-
Understanding the Water Cooling System on a Kawasaki 750sx Standup Jetski
The water cooling system flow and overview for a Kawasaki 750sx standup jetski.
-
Installation of Wired Backup Camera
The installation of an wired backup camera in my 1977 Toyota Chinook with simple automatic enable from reverse light signal.
-
Installation and Modification of RV Roof Fan
The installation of an RV roof fan in my 1977 Toyota Chinook with pulse width modulation speed control modification.
-
Rusty and Leaky Cowl Repair on 1977 Toyota Chinook Camper
Repair of the rusty cowl that leaks water into the interior floor board.
-
1977 Toyota Chinook Restoration named Paris
Top to bottom restoration of a 1977 Toyota Chinook pop-top camper named Paris. Body, engine, interior, electronics, upholstery, etc., etc., are all covered!
-
Installing Dash Camera on 2013 Ram 1500 With Auxiliary 12V Power
I bought a dash camera didn't want the wire hanging down plugged into the cigarette lighter so I hardwired it to the power for the rear view mirror. I'll detail how to remove the mirror and how to tap into some auxiliary power
-
Disabling Automatic Tailgate Lock 2013 Ram 1500
This tutorial describes how to disable the automatic tailgate lock via the key fob and inside door controls on a 2013 Ram 1500 Big Horn.
-
Aligning Headlights On A 2013 Dodge Ram After Leveling or Lifting
I just recently installed the front Rough Country 2.5" leveling kit and my headlights were pointing at Jesus! So I will share how I returned the headlights to the correct angle. This tutorial may be applicable to all 4th generation Dodge Rams.
-
1996 S10 AC to DC Inverter Install
Installing a custom AC to DC inverter into an S10 pickup truck
-
1996 S10 Double DIN Install
Installing a custom double DIN stereo in a 1996 s10 truck
-
Motorcycle Trailer
Built from scratch 2 slot motorcycle trailer.